Woods-powr-grip MRTARC811LDC User Manual download pdf (Page 23)

Rev 2.0/7-12 21 MRTA8-DC: #35076RC

MAINTENANCE

WARNING: Always make sure battery is disconnected before servicing lifter.

INSPECTION SCHEDULE

Perform inspections routinely, according to the following frequency schedule:

Every-Lift Inspection

• Examine the vacuum pads and load surface for contamination or debris (see VACUUM PAD

MAINTENANCE to follow).

• Examine the vacuum pads, controls and indicators for visual damage (see VACUUM PAD

MAINTENANCE to follow).

• Test the battery for adequate charge (see BATTERY TEST to follow).

If a battery’s charge appears to be inadequate, charge and retest the battery (see BATTERY

RECHARGE to follow). If any other deficiency is detected during the inspection, correct it before

using the lifter and perform the Frequent Inspection to follow.

Frequent Inspection

(

following every 20-40 hours’ use; or whenever lifter is out of service for 1 month or more

)

• Examine the lifter’s structure for visual damage.

• Examine the vacuum system (including vacuum pads, fittings and hoses) for visual damage.

• Examine the air filter for conditions requiring service (see AIR FILTER MAINTENANCE to follow).

• Perform the VACUUM TEST to follow.

• Check for unusual vibrations or noises while operating the lifter.

• If the lifter is equipped with a Remote Control System, perform the REMOTE CONTROL SYSTEM TEST

to follow.

If any deficiency is detected during the inspection, correct it before using the lifter and perform

the Periodic Inspection to follow.

Periodic Inspection

(

following every 250-500 hours’ use; or whenever lifter is out of service for 1 year or more

)

• Examine the entire lifter for external evidence of looseness, excessive wear, deformation,

cracks, excessive corrosion, dents to structural or functional components, cuts, or any

deficiency which might constitute a hazard.

• Inspect all parts of the electrical system for damage, wear or contamination that could

constitute a hazard, in compliance with all local codes and regulatory standards that are

relevant for the geographical region.

CAUTION: Be sure to use appropriate cleaning methods for each type of electrical

component, as specified by codes and standards. Improper cleaning

can damage components.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 37 38

No comments

Woods-powr-grip MRTARC811LDC User Manual Page 23