Woods-powr-grip VLPL411LAC User Manual download pdf (Page 4)

Rev 15.0/12-12 2 VLPL4-AC: #35165

WARNINGS

Powr-Grip is pleased to offer the most reliable vacuum lifters available.

Despite the high degree of security provided by this product, certain

precautions must be observed to protect the operator and others.

Always

wear personal protective equipment that is appropriate for the material being handled.

Follow trade association guidelines.

Always

operate the lifter under conditions approved for its design (see INTENDED USE:

OPERATING ENVIRONMENT).

Never

operate a lifter that is damaged, malfunctioning, or missing parts.

Never

operate a lifter if the sealing edge of any vacuum pad is cut or otherwise damaged.

Never

remove or obscure warning labels.

Never

operate a lifter if the Load Capacity or any warning appears to be missing or obscured.

Always

make certain the contact surfaces of the load and all vacuum pads are clean prior to

applying the pads (see MAINTENANCE: VACUUM PAD MAINTENANCE).

Never

exceed the Load Capacity or attempt to lift loads the lifter is not designed for (see

INTENDED USE: LOAD CHARACTERISTICS).

Never

attempt to lift cracked or broken glass with this lifter.

Always

position the vacuum pads correctly on the load prior to lifting (see OPERATION: TO APPLY

THE PADS TO A LOAD).

Never

lift a load when any vacuum indicator shows inadequate vacuum.

Never

touch the vacuum release controls during a lift. This may result in loss of vacuum and

release of the load.

Never

allow people to ride on the lifter or the load being lifted.

Never

lift a load higher than necessary or leave suspended loads unattended.

Never

lift a load over people.

Always

keep other personnel far enough away from the lifter to avoid injury in the event of an

unexpected load release.

Always

place the power control in the inactive position and, when possible, disconnect the

power source before opening any enclosure on the lifter. (Only applicable to powered lifters)

Always

remember that modifications to the lifter may compromise its safety. Wood’s Powr-Grip

cannot be responsible for the safety of a lifter that has been modified by the customer. For

consultation, contact Wood's Powr-Grip (see LIMITED WARRANTY).

Always

employ a ground fault circuit interrupter when connecting the power cable to the power

source.

1 2 3 4 5 6 7 8 9 ... 22 23

Comments to this Manuals

No comments

Woods-powr-grip VLPL411LAC User Manual Page 4

Comments to this Manuals

Related products and manuals for Hoist Woods-powr-grip VLPL411LAC